What safety precautions should be taken for flattening machines?

What safety precautions should be taken for flattening machines?
During the use of the flattening machine, the following safety precautions should be taken into account:
Preparation before operation:
Before using the flattening machine, it is necessary to determine the operating area, remove debris and obstacles within the area, ensure a spacious and bright operating space, and keep it dry, free of water, oil, toxic gases, and other hazardous substances.
The machine should be inspected, including throttle, brake, transmission system, hydraulic system, workbench and other components, to ensure that all components are in good condition, without defects, looseness, abnormal noise and other abnormal situations.
Precautions during operation:
Equipment operators must undergo professional training, obtain equipment operation qualification certificates, and be familiar with operation manuals and safety operation regulations.
When operating the flattening machine, do not approach the moving parts of the machine with your body to avoid injury.
It is strictly prohibited to adjust, disassemble or repair the machine while it is in operation, in order to avoid machine malfunction or personal injury.
Safety precautions for specific types of flattening machines:
For the paint barrel flattening machine, it is necessary to specially check whether the sealing of the equipment is good. If paint leakage or other situations are found, they should be dealt with in a timely manner; At the same time, it is prohibited to make personal modifications and repairs to the equipment, and it is strictly forbidden to use objects with metal materials to impact or strike the equipment.
Food processing equipment such as grain flattening machines and peanut flattening machines should be cleaned and maintained before use to prevent impurities from entering the machine and affecting its normal operation and food safety.
Shutdown and maintenance:
Before stopping the machine, the feeding port should be closed to ensure that the material feeding stops, and then the power supply to each part should be turned off in an orderly manner. The main power supply should not be turned off hastily.
Operators must clean up the debris inside the machine before leaving the work site.
Regularly clean and inspect the interior of the equipment to maintain its sealing and performance.
Safety protection and equipment:
When operating and repairing machines, operators should wear protective equipment that meets safety requirements, such as work clothes, gloves, shoes, etc., to reduce the risk of accidents.
Following these safety precautions can ensure the safe operation of the flattening machine, protect the personal safety of operators, and extend the service life of the equipment.